User’s
Manual
–
A
REBO
S Impact Wrench
4
and instructions for changing accessories. Regularly check the plug and the cable and have
damage repaired by a qualified electrician. Inspect extension cords periodically and replace if
damaged. Handles dry and free of oil and fat.
•
Pull the plug.
•
When not in use, before servicing or when changing accessories such as Blades, bits and
machine tools of all kinds
•
You can insert any tool key.
•
Before you turn that key and adjustment are ntfernt.
•
Avoid unintentional starting.
•
Do not wear to the mains connected tools with your finger on the switch. Make sure that the
switch is off when connected to AC power.
•
Extension cords for outdoor.
•
Use outdoors only for approved and appropriately labeled extension cord.
•
Stay alert.
•
Watch your work, do the sensible and use the tool if you are tired.
•
The tool for damage control.
•
Before use, the tool always the safety devices and parts carefully for proper and intended
function. Check that the moving parts function correctly, that they are not jammed or
damaged parts. All parts must be correctly installed and meet all the conditions necessary for
the proper operation of the tool to ensure. Protection devices, switches or other parts that
are damaged should be properly recognized by a qualified electrician repaired or replaced.
Do not use tool if switch does not turn on and off the leaves.
•
Attention!
Use your tools and accessories described in this safety information. Insert your
tool exclusively for the work for which it was designed and look for appropriate working
conditions. Detourned use can lead to dangerous situations.
•
Repairs should only be recognized by the expert.
•
This power tool complies with relevant safety regulations. Repairs should only be performed
by a qualified electrician and with original spare parts. Violations could cause injury to the
user.
•
Attention!
When using the equipment, a few safety precautions must be observed to
prevent injury and damage. Read these instructions / with due care. Keep this place, so that
the information is available at all times. If you give the device to other people, give them
these operating / safety instructions as well. We assume no responsibility for accidents or
damages caused by failure to comply with these instructions and safety precautions.
Technical specifications
Model
AR-HE-IW1010
Rated output
1010 W
Torque
450 Nm
Idle speed
2200 rpm
Rated input voltage
230 V
Cable length
2 m
Direction of rotation
Forward; Reverse
Degree of protection
II
Colour
Red
