background image

User’s Manual

 

 A

REBO

S Induction hob 2 hot plates 

 

14 

 
 

EU Declaration of Conformity 

 
 
We, the  
 
Canbolat Vertriebs GmbH, Gneisenaustraße 10-11, 97074 Würzburg, Germany 
 
Hereby declare that the devices described in the following comply with the relevant, fundamental 
safety and health requirements of the EU directives due to their design and construction as well as in 
the versions marketed by us. 
 
Product name: AREBOS Induction hob 2 hot plates 
Article number: 4260627422272 
Model number: AR-HE- IK2 
 
If the device is modified without our consent, this declaration of conformity loses its validity. 
 
Directives 
This device complies with the following EU/EC directives: 
2014/30/ EU EMC Directive 
2014/35/ EU Low Voltage Directive 
2009/125/ EC Ecodesign Directive 
2011/65/ EU RoHS Directive 
 
 
Date/Signature Manufacturer/Location:  

           Würzburg, 26.01.2022 

 

 

Signature:                                                 
Dipl.-Inform. (Univ.) Korhan Canbolat, Managing Director 
 
Representative of this User Manual/Technical Data: 
Dipl.-Inform. (Univ.) Korhan Canbolat, Managing Director 
 
 
Office address:  

 

Canbolat Vertriebs GmbH 

  

Gneisenaustraße 10-11 
97074 Würzburg  

 

 
You can find the return address in the imprint: https://www.arebos.de/impressum/ 
 
VAT identification number: DE 263752326  
The court of entry in the commercial register is Würzburg, HRB 10082  
WEEE-Reg.-Nr. DE 61617071

 

 

 

Summary of Contents for AR-HE-IK2















Reviews: