User’s Manual
–
A
REBO
S Glass ceramic cooktop 4 hot plates
9
Hotplates should not be switched on without a pan on top.
The base of the pan should be flat and dry.
Pans that have been used on gas cookers are not normally completely
flat and absorb heat badly.
Make sure that the diameter of the pan is at least
that of the hotplate.
Avoid dragging pans over the radiant glass surface, as it may get
scratched.
Always lift the pan.
Never use tin foil or plastic containers. They may melt and
fuse permanently with the radiant glass surface.
6.
Cleaning and maintenance
•
Disconnect the plug and wait until the unit is cooled down completely. Clean it after every
use.
•
If the pots/pans are used without being cleaned, discoloration or cooked on stains may
occur.
•
Do not use benzene, thinner, scrubbing brush or polishing powder to clean the cooker.
•
Do not use any flammable, acidy or alkaline materials or substances near the device,
as this may reduce the service life of the device and lead to deflagration when the device is
turned on.
•
Wipe using dish washing agent and damp cloth.
•
Use a vacuum cleaner to suck up dirt from the air intake and exhaust vent.
•
Never run water over the unit (Water getting inside may cause a malfunction).
