Original User Manual
–
A
REBO
S Ice Maker
8
1
ON/OFF
Button
Ice cube preparation, readiness, troubleshooting
Press this key:
1. to start / stop the ice cube production.
2. to resume making ice cubes after adding water when water tank is
empty; the indicator lamp ADD WATER turns off.
3. to eliminating errors.
To make ice cube:
1. Connect the mains plug to the wall socket. Do not turn on the ice maker
within 30 minutes after moving.
2.Open the lid and remove the ice cube container.
3. Pour water into the water tank up to the MAX-marking. Please use
drinking water for making ice. (The water level must be below the ice cube
tray).
4. put the ice cube tray back and close the lid
5.Press the button to start.
To stop Ice Cube Production
Press the button to stop Ice cube production.
2
S/L button Select your desired ice cube size: small or large
L1
WORK LED
Power indicator
The indicator lamp starts flashing as soon as unit was plugged into the wall
socket.
WORK LED illuminates continuously during operation.
CAUTION:
Wait min. 3 minutes before switching the appliance on again to protect the
compressor.
L2+L3
S/L LED
Indicating the selected size of the ice cube
L4
“ICE
FULL”
LED
Ice compartment full indicator: shows the ice compartment is overfilled.
The lamp indicates the ice storage tray is full. Remove all the ice cubes
from the tray.
Low temperature protection (ambient temperature below 5 ° C)
