User’s Manual
–
A
REBO
S Infrared heater 2500 W with remote control
9
6.
Use
6.1 Commissioning and operation
•
Turn on the power. A buzzer will beep once, the digital screen and the display will not be
displayed. At this point, press the ON/OFF button to enter standby mode.
•
Press the power button to select the power level. The P.0 indicator appears on the screen
and the indicator flashes three times to indicate that the unit is in standby mode.
•
The P1 indicator appears on the screen and flashes three times to indicate that the unit is in
low operating mode.
•
Press the function button again until the middle level, the buzzer will beep once, the P2
indicator will appear on the screen and the indicator will flash three times to indicate that
the unit is in medium operating mode.
