Arduino MLT-BT05, Instruction Set, Page: 4 / 5

11. set/query -iBeacon UUID ：
instruction response parameter
AT+IBSUUID<Param> +IBSUUID=<Param>
OK
Param ：
FDA50693A4E24FB1AFCFC6EB07647825
AT+IBSUUID +IBSUUID=<Param>
12. set/query- iBeacon Major ：
instruction response parameter
AT+MAJOR<Param> +MAJOR=<Param>
OK
Param : 0x0001~0xFFFE
default ： 0x0007
AT+MAJOR +MAJOR=<Param>
13. set/query -iBeacon Minor ：
instruction response parameter
AT+MINOR<Param> +MINOR=<Param>
OK
Param: 0x0001~0xFFFE
default ： 0x000A
AT+MINOR +MINOR=<Param>
14. software restart (reboot after 500mS):
instruction response parameter
AT+RESET OK no
15. enter low power mode (can be searched after entering):
instruction response parameter
AT+SLEEP +SLEEP:OK no
16. search for Bluetooth devices (master mode instructions):
instruction response parameter
AT+INQ<Param> OK
Param
：
1-0
1: start scanning
0:
stop scanning
17. connect the remote device (master mode command):
instruction response parameter
AT+CONN<Param> connection information
Param
：
0-7
18. get host scan to slave MAC address (master mode command):
instruction response parameter
AT+RSLV< Param > +RSLV=MACaddress
OK
Param ： ( 0-7 )