If you need any further help please refer to the Calypso user manual,
visit our website for videos and guides, or contact us for an online
consultation.
Operating the Calypso Breastpump
1) Connect the power adapter
to the back of the pump and
the pumpset/s to the front of
the pump unit.
2) Put the breastshell/s to the
breast. Switch on the pump
by pressing the on/off switch.
The green LED light will come
on. The vacuum & cycles are
set at the lowest level.
To get the milk to start to flow
set the cycles high
and the vacuum low
Once the milk starts to flow
set the vacuum higher
and the cycles lower
Pumping Poem
