Ardo bellis, Instructions For Use Manual

Page: 12 / 102

en
8
You can nevertheless change the values for the vacuum and cycle manually at any time and define a new time for the length
of the expression history. This takes you out of save mode. When you have finished expressing, you can save any changes to
the expression history. If you do not save the new values, the previous settings are kept.
Whenever the Memory Plus button is lit up, your expression history is saved and when the breastpump is switched on, it
automatically starts to express using your personal data.
Using the Memory Plus function—step-by-step procedure
1
Expressing
Express using your favorite settings.
2
Saving an expression history
At the end of your expressing session, press the Memory Plus button to save your individual expression history.
As confirmation, you will hear a tone, the button lights up, and the breastpump automatically switches off.
3
Accessing your expression history
Switch the breastpump on. You express straightaway using the saved data. The Memory Plus button flashes
slowly throughout.
Deleting data
You can delete the saved data at any time if you do not want to express with the memory function. By holding down the
Memory Plus button once, the saved data is deleted and the button no longer lights up.
4.6 Power Pumping—Increasing the milk volume
Automatic Power Pumping is a pre-defined one-hour interval pumping program—
expressing three times with two pauses—that aims to increase the volume of milk
you produce. During the pauses you can remove the pumpset and move around
freely.
The operation corresponds to the basic functions (see Chapter 4.4.1). The progress of
the expressing is indicated by the green and white segments that light up.
Power Pumping imitates the natural sucking behavior of babies. There are times—
usually in the evenings—when newborns or older babies want to be breastfed at
10-minute intervals to stimulate milk production (cluster feeding). More information
can be found in Chapter 7.4.
= Expression = Pause