SM753
V
For transport reasons, the machine’s os-
cillating group is locked in place by 4 spac-
ers and screws. Before using the machine,
remove the spacers and locking screws.
Keep the screws and spacers for future
use.
PREPARING THE MACHINE FOR USE (depending on the model)
Close off the holes using the plugs sup-
plied. The plugs can be found in the bag
containing the documents.
N.B. If the spacers cannot be removed from
the machine in this way, open the rear
panel, remove them and replace the panel.
For transport reasons, the machine’s os-
cillating group is locked in place by 4 spac-
ers and screws. Before using the machine,
remove the locking screws with a suitable
wrench.
Insert a screwdriver in the holes and lever
out the 4 plastic spacers as shown in the
figure.
N.B. If the spacers cannot be removed from
the machine in this way, open the rear
panel, remove them and replace the panel.
3
