Quickflip
™
2 (69167), Quickflip
™
3 (69168) & Express
™
2 (69802)
Page 6
GetEskimo.com
1-800-345-6007
fOR QuICKflIP 2 ONly
1. Attach (2) seat kit mount brackets (68430) to each hinge assembly using
(4) provided 1/4-20 x 3/4” hex head bolts and nyloc nuts. Make sure the
mount brackets are positioned in the correct hole locations so seat brace
and seat positions are correct later in instructions.
SEE fIGuRE 2.
2. Attach (2) seat tube spacers to each seat kit mount bracket using (4)
provided 1/4-20 x 3/4” bolts, nyloc nuts and washers.
3. Attach (2) base tubes (68225) to the top side of seat tube spacers us-
ing (4) provided 1/4-20 x 1-3/4” bolts, nyloc nuts and (8) washers.
SEE
fIGuRE 3A.
4. a. Attach table (68439) to top of rear base tube and seat brace (68172)
to bottom of rear base tube using (2) provided 1/4-20 x 3” bolts, nyloc
nuts and (4) washers.
SEE fIGuRE 3A.
NOTE: Seat brace should be oriented so cross tube is to the front
of ice shelter.
SEE fIGuRE 3A.
b. Attach front of table to front base tube using (1) provided 1/4-20 x 2”
bolts, nyloc nut and (2) washers.
SEE fIGuRE 3A.
fIGuRE 3A
(2) 1/4” x 3/4” bolts
fIGuRE 2 (right side shown)
(2) 1/4” nuts
hinge
seat kit mount bracket
front base tube
rear base tube
table
(1) 1/4” x 2” bolt
all nuts are 1/4”
all washers are 1/4”
seat kit mount bracket
seat brace tube
(4) 1/4” x 1-3/4” bolts
(2) 1/4” x 3” bolts
seat tube spacer
