ARDESTO IR-C2228-TQ, Instruction Manual

Page: 15 / 36

2
1. To avoid a circuit overload, do not operate another high wattage appliance on the
same circuit.
2. If an extension cord is absolutely necessary, a 10-ampere cord should be used.
Cords rated for less amperage may overheat. Care should be taken to arrange the
cord so that it cannot be pulled or tripped over.
SAVE THESE INSTRUCTIONS
More specifically:
DO NOT
let children or untrained persons use the appliance without supervision.
NEVER immerse the iron, cable or plug in any liquid.
DO NOT leave the hot iron touching fabrics or very inflammable surfaces.
DO NOT leave the appliance unnecessarily plugged in. Disconnect the plug from
the mains when the appliance is not being used.
NEVER
touch the appliance with wet or damp hands.
DO NOT use the power cord or the appliance in order to pull the plug out of the
socket.
DO NOT leave the appliance exposed to the weather (rain, sun, etc. ).
DO NOT leave the iron without supervision when it is connected to the power
supply.
DO NOT fill the reservoir with water before removing the plug from the socket.
PLEASE NOTE!
Do not use chemical additive, scented substances or decalcifiers. Failure to
comply with the above-mentioned regulations leads to the loss of guarantee.
D E S C R I P T I O N O F D E V I C E
(A). Soleplate
(C). Filler door
(E). Spray button
(G). Cord bushing
(I). Adjust the thermostat knob
(K).
Maximum filling level
ANTI-CALC SYSTEM
A special resin filter inside the water reservoir softens the water and prevents scale
build-up in the plate. The resin filter is permanent and does not need replacing.
(B). Spray organ
(D). Steam dial
(F). Shot-steam button
(H). indication light
(J). Self-cleaning button