13
EN
and a maximum of 1.7 liters). Never fill the water boiler over the
“max”. Otherwise the hot water can spatter out of the base.
ATTENTION!
Make sure that you do not spill any water on the base.
4. Release the button to open the lid.
5. Place the jug on the base, and insert the plug in the wall socket. Push
down the on/off switch. The on/off pilot light will illuminate.
6. The jug kettle is now switched on, and the water will now begin to
heat. The jug kettle switches off automatically a few seconds after the
water has come to the boil. The on/off pilot light will now extinguish.
7. Remove the jug from the base by the handle, and pour the water out.
ATTENTION!
Be carefully you do not contact the hot water. It can
cause serious burning wounds.
8. When you wish to heat the water without it coming to the boil you
can switch off the jug kettle at any time you require.
9. Remove the plug from the wall socket when you have finished using
the jug kettle.
Overheating safeguard
The jug kettle is fitted with an overheating safeguard. This will switch
off the jug kettle if it is operated without (sufficient) water. Allow the jug
kettle to cool down for at least 10 minutes before using it again.
CLEANING AND MAINTENANCE
• Remove the plug from the wall socket, and allow the
appliance to cool.
• Clean the jug with a damp cloth. Never immerse
the appliance in water. Never put the appliance in a
dishwasher. Make sure that the electrical connections do
not become damp.
• If the interior of the jug has become severely discoloured,
then the best way to clean it is with a damp cloth and
a little washing soda. After cleaning, rinse the jug very
thoroughly.
