ARDESTO DDF-273W, User Manual

Page: 33 / 40

Placement
It is necessary to install the appliance in the room where the ambient temperature
meets the climatic class indicated on the rating plate:
Climatic Class Ambient Temperature
SN +10ºC…+32ºС
N +16ºC…+32ºС
ST +16ºC…+38ºС
T +16ºC…+43ºС
The appliance should be installed at a distance from such heat sources as heating batteries,
boilers, direct sunlight, etc. It is necessary to ensure air circulation around the appliance.
When the appliance is installed under the wall hanging cabinet, the distance from the top
of the appliance to the cabinet should be not less than 100 mm. If possible, it is not rec-
ommended to install the appliance under the wall hanging cabinets. It is necessary to use
adjusting legs for the alignment of the appliance.
WARNING! After installation, the power plug must be available to ensure immediate dis-
connection of the appliance from the network.
Electrical Connection
Before connecting the appliance to the network, it is necessary to make sure that the
voltage and frequency requirements indicated on the rating plate meet parameters of the
household network.
The appliance must be grounded. The power plug has a corresponding ground contact. If
the network receptacle is not grounded, it is necessary to connect the appliance to ground
in accordance with current regulations, by consulting with a qualified electrician. The man-
ufacturer shall not be liable in the case of non-compliance with safety regulations.
Operation of the Appliance:
First Use
Before the first use of the appliance it is necessary to wash it inside with warm water and
neutral detergent, in order to remove the smell of new technical product, and then wipe it
dry.
WARNING! Do not use synthetic detergents and abrasive powders as they may damage
the coating.