ARDESTO CH-1500ECW, User Manual

Page: 38 / 52

5
5.5 Convector with protected against splashed water IP24 can be installed in bathroom (see fig. 4).
Do not install the convector:
- In zone 1 of bathrooms;
- In zone 2 , if the person being in a bath or shower can touch to switches and other controls .
In humid areas such as bathrooms and kitchens the power socket must be installed at least 25 cm
above the floor.
6 ORDER OF OPERATION
Warning:
It is strictly forbidden to switch on and operate the convector without fixing it to the brackets
on the wall or on supports on the floor.
The convector can only be switched on and operated in a vertical position with the air intake grate
down. When the convector is switched on for the first time, the smell from evaporation of the conservation
materials is possible. It is recommended to ventilate the room.
6.1 Description of controls
Fig. 6
6.2 Operating
Connect the convector cord plug to the power socket. The indicators on the control panel will light up
and will to show the time (Fig. 6). The convector is ready for operation.
6.2.1 Switch ON/OFF your appliance.
To switch on your convector press the button ON-OFF/MENU. The last mode used will be displayed.
To switch off your convector press and hold the button ON-OFF/MENU. The time will be displayed.