132
EN
NOTE: Under AUTO mode, both the AUTO mode and the actual
operation mode indicator lights illuminate for some models.
FAN operation
• Press the «MODE» button until the»FAN « indicator light comes on.
• Press the «FAN SPEED» button to choose the fan speed. The
temperature can not be adjusted.
• Do not put the duct to window.
TIMER operation
When the unit is on, press the Timer button will initiate the Auto-off
stop program, the TIMER OFF indicator light illuminates. Press the UP or
down button to select the desired time. Press the TIMER button again
within 5 seconds, the Auto-on start program is initiated. And the TIMER
ON indicator light illuminates. Press the up or down button to select the
desired Auto-on start time.
• When the unit is off, press the Timer button to initiate the Auto-on
start program, press it again within five seconds will initiate the Auto-
off stop program.
• Press or hold the UP or DOWN button to change the Auto time by 0.5
hour increments, up to 10 hours, then at 1 hour increments up to 24
hours. The control will count down the time remaining until start.
• The system will automatically revert back to display the previous
temperature setting if there is no operation in a 5 seconds period.
• Turning the unit ON or OFF at any time or adjusting the timer setting
to 0.0 will cancel the Auto Start/Stop timer program.
• When the malfunctionoccurs, the Auto Start/Stop timed program will
also be cancelled.
SLEEP/ECO operation
Press this button, the selected temperature will increase(cooling) or
decrease(heating) by 1°C/2°F(or 1°F) 30 minutes.The temperature will
then increase (cooling) or decrease (heating) by another 1°C/2°F(or
1°F) after an additional 30 minutes. This new temperature will be
maintained for 7 hours before it returns to the originally selected
temperature. This ends the Sleep/Eco mode and the unit will continue
to operate as originally programmed.
NOTE: This feature is unavailabe under FAN or DRY mode.
