ARDES Medicura ARM240N, Manual

Page: 13 / 59

13
Choose the desired accessory for the massage, mount it onto the
hexagonal base making sure that the apparatus is both switched off and
unplugged.
Use the apparatus by plugging it in and turning the switch to 1 to operate
the massage only, or 2 to operate the infrared massage.
Adjust the speed of the massage by means of the appropriate switch.
The accessories supplied can be used interchangeably.
Choose the accessory based on your level of sensitivity and needs,
mount it onto the hexagonal base making sure that the apparatus is
switched off and unplugged.
You can find more information on the use in the diagram at the end of the
paragraph, to choose the speed and the right accessory for every body
part to be massaged.
Use the cloth head if you are applying cream during the massage to
prevent dirtying the accessories. The cloth head will not interfere with
the effectiveness or pleasure of the massage. Mount it by screwing it in
a clockwise direction onto the base unit, making sure that it is properly
closed.
Accessories 3a and 3b are known as multinodes due to the various
shaped protrusions which have been specifically designed to simulate
finger pressure, an ancient massage technique that is performed by
pressing the fingers on the points of the body that correspond to the
organs. Using these, you can perform percussion massages of varying
intensity. Applying greater pressure will result in a deeper massage.
The 3c roller accessory is used to perform a vibration massage that
works against cellulite due to the up and down movement. It also
promotes good blood circulation. Accessory 3d is particularly useful for
a more delicate and less intense friction massage which is still just as
pleasurable and effective.
It is recommended for alleviating muscular pain from cramps due to the
mild, relaxing action of the massage.
The infrared/heat function combined with a massage applies heat to the
skin which helps absorb the nutrients from the cosmetic products used.
Do not massage the same part of the body for more than 5 minutes and
do not run the appliance for more than 15 minutes at a time.
Before beginning a new session of massages wait for the appliance to
cool down at least 15 minutes.