9
Instructions for use
GB
Before connecting or disconnecting the appliance, make sure that the product is
in off position.
To turn the appliance on put the plug in the socket and push On/Off push button;
the power indicator will light on in the control panel. The appliance is provided with
display that show ambient humidity, timer (if setted) and ambient temperature.
Push HUMIDITY push button to set the working mode needed: CNT (continuous
working), 40% humidity, 50% humidity, 60% humidity or 70% humidity. The relative
indicator light will turn on.
Push SPEED push button to set the ventilation speed: HI (high) or LO (low). The
relative indicator light will turn on.
Push the TURBO function push button to turn on the turbo ventilation function;
the relative indicator light will turn on. This function dry the moisture in the air
continuously and it could help to dry the laundry. To turn this function off push again
the TURBO push button.
The appliance is equipped with 24 hours timer that allow to set the automatic start
or automatic off of the product. To set the automatic start: when the product is
in stand-by mode push TIMER push button; timer indicator light will turn on and
the time remaining before the appliance will be turned on blink on the display. To
adjust the timer, repeatedly push TIMER push button then wait a few seconds for
the setting to be memorised. On the control panel timer indicator light will be on,
indicating that the timer for auto on is set. When the programmed time is reached,
the appliance is turned on with the settings used during the previous period of
operation.
To set automatic off: when the product is on, push TIMER push button; timer
indicator light will turn on and the time remaining before the appliance will be turned
off blink on the display. To adjust the timer, repeatedly push TIMER push button
then wait a few seconds for the setting to be memorised. After few seconds the
display will show ambient humidity and timer indicator light will be on in the control
panel, indicating that the timer for auto off is set. When the programmed time is
reached, the appliance is turned off automatically.
To deactivate timer function repeatedly push TIMER push button until the display
will show “0” (zero). If the timer function is setted push timer push button one time
to check in the display the remaining time. Timer steps (value show on the display):
0H, 1H, 2H, 3H, 4H, 5H....until 24H (1 hour step).
Push TEMPERATURE push button to check the ambient temperature on the
display. After few seconds the display will show again the ambient humidity.
If you don’t want to dry the air, just want to circulate the air or remove the odours
inside the room, please press AIR CLEAN push button.
To turn the appliance off push again On/Off push button.
When the water tank is full the water full indicator light turn on for alarm and the
compressor stop to work automatically for self-protection.
How to drain the water tank:
To move the water tank, pull it out squarely from the unit, empty the water tank and
replace it in the unit. Make sure it is properly positioned, in order for the ‘water full’
indicator light will off and your dehumidifier is operating. Please note, in case, the
water tank has not been positioned well, the water full indicator will turn red.