ARDES AR8D11, Instructions For Use Manual, Page: 9 / 24

9
Continuous drainage:
When the dehumidifier is operated at very high humidity
levels, the water tank will require more frequent
drainage. In this situation, it may be more convenient to
set the unit up for continuous drainage.
Connect the hole for continuous drainage with water
tube of 11 mm inner diameter (not provided with the
appliance). Ensure the water will always drain away
freely and the tube will remain in right place.
CAUTION : in very cold weather conditions, precautions
should be taken to prevent the water tube from freezing.
replace it in the unit. Make sure it is properly positioned, in order for the ‘water full’
indicator light will off and your dehumidifier is operating. Please note, in case, the
water tank has not been positioned well, the water full indicator will turn red.
ATTENTION: Do not tilt the appliance by more than 45° or turn it upside down,
whether it is stationary or being transported.
ATTENTION: Before turning on the appliance, let it settle for at least two (2)
hours after installation.
Maintenance
GB
Disconnect the plug from the socket before cleaning it.
In order to clean the body of the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents. Do not use very wet substances,
liquids or cloths to prevent water from entering into the apparatus and irreparably
damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
Cleaning the filter:
This dehumidifier is equipped with 2 filters
Dust filter
Active
carbon
filter
Air inlet