36
/
44
PARAMETERS:
A) Functions
B) hours
C) minutes
D) temperature
D1) top heater
D2) bottom heater
E) Preset program (see “Mode of operation”)
7.
When last parameter has been confirmed, the oven will start working.
Note: if DELAYED START has been set, the display will show alternately the
set parameters and the time left to the start of working
WHILE WORKING
The display will show the set parameters and the time left to the end of cooking.
The following operations can be done while the oven is working:
-
PAUSE:
press the ENTER key
to stop momentarily the working (time
will blink); press again the ENTER key
to resume working.
Note: the oven will stop working even when you open the door and it will
resume working when you close the door again.
-
LIGHTING
: press this key
to light on or light off the inner lighting;
-
CHILD LOCK:
press this key
for 3 seconds to activate the child lock
(the keys will not work); press this key
for 3 seconds to unlock the
keys.
-
CHANGE TIME AND TEMPERATURE
(only for DIY mode): if you need to
adjust time and temperature, press this key
, this icon
will ON,
then adjust the parameters and confirm by pressing the ENTER key
.
Note: only minute and temperature could be set.
WATER LEVEL ICON
To start any program, if the water level on the tank is lower than the MIN level
marked, the icon
will blink, the program can not start.
To start any program successfully, remove the tank (6), fill it with water, place it
in its site and close the door.