GB
Technical informations
1 - Connector socket
2 - Bag
3 - Signal lamp
(only on articles AR071 - AR073)
4 - Power cable
Technical data indicated on the appliance.
1
2
3
4
Do not use this appliance near to a bathtub, a shower stall, or a swimming
pool.
Do not use the appliance in presence of flammable substances
(petrol,paints, etc.).
Do not exert pressure on the appliance, do not squeeze it, do not place it
underneath the weight of your body or underneath part of it.
This appliance is meant to be used for medical purposes in hospitals.
During the first use you can smell a slight odor, due to the first reaction of
the warmed insulating material, which dissipates when it gets hot.
Electrical safety of this appliance is assured only if it has been connected
to an effective earthing system.
IMPORTANT NOTE: the perception of heat varies from person to
person.
If the temperature is too high for you after the charge period, do
not use the appliance and allow it to cool; for successive use, lower the
charging temperature by disconnecting the power cable from the socket
before the LED turns off:
the shorter the charging time, the lower the
temperature.
DO NOT USE WITHOUT COVER
GB
Instructions for use
Plug the connector into the appliance, plug the cable into the wall socket
and leave the appliance connected only for few minutes to charge it (see
data plate).
Use only the cable supplied with the appliance.
During charging, the appliance must be placed flat with the connector
on top.
It is recommended to monitor the appliance during charging.
Disconnect the warmer from the wall socket and place it in the bag
supplied with it.
The highest temperature will be reached about 20 minutes after the
appliance has been disconnected from the wall socket.
7
