MAINTENANCE
Disconnect the plug from the socket and let the appliance cool down well before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from entering into the appliance and
irreparably damaging it.
Never use abrasive sponges to clean the inside of the appliance.
To clean the heating resistor, use a brush or a dry cloth to remove any food residue.
To clean the basket and the container, use hot water, washing up liquid and a non-abrasive sponge; alternative,
they can be washed in the dishwasher.
Do not clean the container, the basket and inside the appliance with metal tools or abrasive materials to avoid
damaging the non-stick coating.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
Problem
Cause
Solution
The appliance does not work
Timer off
Set timer
The chips are not cooked
Too much food in the basket
reduce the quantity of food in the
basket
The temperature set is too low
Increase the cooking temperature
Food is not evenly cooked
During cooking, the food was
not mixed
Cook for another few minutes, keeping
the food mixed and see the settings
table
The fried food is not crispy
Food was used which is
suitable for a traditional oil
fryer.
Use food suitable for oven cooking or
consult the settings table
White smoke is coming from
the appliance
Fatty ingredients
As indicated in the settings section,
avoid cooking excessively fatty food
The container contains fatty
residue from previous used
Clean the container and/or basket well
after each use
E1 on display
Power board disconnected
Go to an authorised
support centre
E2 on display
Power board fault
Go to an authorised
support centre
10
