- 2 -
CAUTION
●
Thank you for using our product. For the sake of maintaining the normal operation of this
ARD device, please read the user manual completely before installation.
●
Please carefully check the model and parameters on the nameplate of this product with
relevant parts of elevator. If there is any non-identical information, please contact with the
authorized engineering service center where you bought the device immediately, to consult
the solution before any installation or operation.
●
Don’t touch the high voltage parts built in the device during
testing or setting the
parameters or checking the unit.
●
If this device has not been used over than six months, please charge the batteries before
operation. The device may be stayed at the system integrator site for some time, thus,
please check it with the supplier if you have uncertain information about this matter.
Battery charging method :
Connect input power in 3 phase / 380VAC to charge the batteries automatically.
●
If there is any failure happened, please contact with the qualified technical service center, all
repairs should be performed by qualified service personnel.
OUTLOOK
Power Switch
LCD Display
Terminals for
Wiring connection