ArcVision ARC-19281N, User Manual

Page: 36 / 77

User Manual
36
3-2 Event Setup
3-2.1 Video Loss
3-2.1.1 Configuration
Item Description
Enable Enable / Disable video loss detection function
3-2.1.2 Event Handling
Item Description
Log Write to event log when the video loss event happens.
Event Record
Select channel for event recording when event occurs. The video setup
corresponds to the "Configuration
→ Recording Settings → Event Video
Recording" (refer to 3-1-1-2 Event Record)
Popup
In the live mode, if video loss of a channel is detected, it will pop up the
channel full screen. You can specify a warning window display, 1: the
main screen, 2: the second screen. *1
Popup Channel When an event occurs, pop up the specified channel.
Buzzer
Specify the DVR behavior of whether to activate the
buzzer when an event occurs.
Relay
Specify the DVR behavior of whether to activate the
relay when an event occurs.
PTZ
Specify the DVR behavior of whether to change to the
PTZ control mode to the specified channel when an event occurs.
Go Preset Moves the camera to the specified preset point when an event occurs.
Resume Preset
Moves the camera back to the specified preset point when an event is
finished.
*1 Only for Maya V2 Series