arcus-eds
I
KNX
SYS
IP
KNX System Devices
Application Description
Gateway KNX-GW-IP-2TE
Arcus-EDS GmbH
Rigaer Str. 88 , 10247 Berlin
Tel.: +49 / (0)30 / 2593 3914
Fax.: +49 / (0)30 / 2593 3915
e2
Subject to change
Page 2
1 First Steps
To use the gateway all 3 connectors must be connected.
As soon as all connections are established and your router or server is working as a DHCP-Server
( Dynamic Host Configuration Protocol ) the IP-Gateway of your ETS can be selected as a possible connection.
The default name at transmission is
ArcusIPGW
. Additionally, a label showing the distinct MAC address can be found on the
device itself. This allows assignment via the MAC address in instances where different KNX-IP-Gateways have already been
set up.
In this example, the IP-Gateway has been assigned the IP-address 192.168.1.188
Additional settings can be accessed via the web-interface of the device. To access these, open your default browser and enter
the IP-address into the address bar. In the case of a functioning nameserver, access to the gateway is also possible
via ÍP-Gateway-Name´.yourdomainname.
( e.g. ArcusIPGW.fritz.box with a fritzbox as nameserver ).
RJ45 (Ethernet)
AUX
KNX
Seite 2
