8
Transporting and moving your Arctica fridge
The product
must
be unplugged before moving and should always be moved in the
vertical position. Leave the product to stand for at least 24 hours before reconnecting.
Before you plug your appliance in
IMPORTANT:
Ensure that your Arctica unit is left to stand for
24 hours
after
transportation prior to switching on, as this will allow the refrigerant to settle.
Ensure that you have cleaned the interior with a soft cloth dampened with lukewarm
water containing a
mild detergent
. Rinse with clean lukewarm water, and dry
thoroughly.
DO NOT
use soaps, wire wool, scouring powder disinfectants of any kind or
detergents containing acids or abrasives to clean the interior.
Using Appliance for First Time
When unpacking and cleaning are complete, plug your 200L or 400L fridge into a
suitable earthed socket and the appliance will switch on.
For the 700L Gastronorm fridge, before plugging in, close the door of the
appliance and ensure that the power switch is set to [O]. Plug the mains lead of
your appliance into a suitable earthed socket. Switch the green power button
next to the controller from [O] to [1]. Once switched on, the current internal
temperature will be displayed.
IMPORTANT:
We also recommend that you leave your Arctica refrigerator running for
24 hours
before filling to ensure it is working properly.
Note: This appliance has been supplied with a factory pre-set temperature of +3°C.
Important Refrigerant Information
All 200L & 400L Arctica refrigerators contain environmentally-friendly, non ozone
depleting R600a refrigerant. Our 700L Arctica gastronorm fridge uses R134a.
WARNING:
Do not damage the refrigerant circuit
As R600a and R134a are both flammable gases, it is
essential to avoid damage to the
refrigeration circuit during transportation and installation
. If the refrigeration
circuit is damaged, avoid using a naked flame in the vicinity of the refrigerator and
connecting power to the refrigerator. Also make sure there is good ventilation within
the room.
