Cool
Mode
1)
Install the exhaust hose and window kit properly (see pages
3
&
4
).
2)
Plug the Power Cord into an electrical outlet.
3)
Turn on the unit by pressing the
POWER
button.
4)
Press the M
ODE
button until the
Cool
mode indicator lights up on the control panel display.
5)
Press the
▲
or
▼
until the desired room temperature appears on the control panel display. The
tempera-ture ranges from 61˚F
-
88˚F.
6)
Select the desired fan speed by pressing the
FAN SPEED
button.
NOTE:
During hot days, the unit will cool the room most efficiently by setting the temperature at the low-
est setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the ex-
haust hose and window kit, and keeping direct sunlight to a minimum will also improve the cool-
ing efficiency.
NOTE
:
When the unit is running on air conditioning mode, the exhaust hose is required and must be
vented outside using the supplied window kit.
D
ry
Mode
1)
Install the exhaust hose and window kit properly (see pages
3
&
4
).
2)
Plug the Power Cord into an electrical outlet.
3)
Turn on the unit by pressing the
POWER
Button.
4)
Press the
MODE
button until the d
ry
mode indicator lights up on the control panel display.
NOTE:
The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly dur
-
ing the dehumidification process. Keep the windows and doors closed to aid the effectiveness of
the unit in removing the moisture from the room.
NOTE
:
When the unit is running on d
ry
mode, the exhaust hose is required and must be
vented outside using the supplied window kit.
NOTE:
The unit will not perform in d
ry
mode when the room temperature is lower than 50˚F .
9
UNIT OPERATION
Summary of Contents for AP6018
Page 5: ... 3 WINDOW KIT ASSEMBLY ...
