Arctic Essentials Owners Manual
37
Start-up:
1. Add pucks to floating dispenser and open to setting 4.
2. Add 7 tablespoons (100 grams) of Arctic Pure
®
Refresh per 1500 litres (396 gallons) of water.
3. Add 1 tablespoon (14 grams) of Arctic Pure
®
Spa Boost per 1000 litres (265 gallons) of water.
4. Test the Chlorine level. Once the chlorine reads within the ideal range (1-3 ppm) turn tablet
dispenser down to 1 - 2 (more or less according to bather load).
5. Start the Boost Filtration mode to circulate the chemicals and do not use spa for two hours after
the mode ends.
Note: The above example is for a spa without an ozone system. If your spa is equipped with an ozone
system please contact your dealer for proper Chlorine levels.
Weekly:
1. Add pucks to floating dispenser and reset the setting if necessary.
2. Add 7 tablespoons (100 grams) of Arctic Pure
®
Refresh per 1500 litres (396 gallons) of water.
3. Wait at least one hour and add 1 tablespoon (14 grams) of Arctic Pure
®
Best Defence per 1000
litres (265 gallons) of water.
Important: Arctic Pure
®
Refresh significantly reduces pH and TA. One hour after adding Arctic Pure
®
Refresh test and adjust TA and pH as needed.
Bromine System:
Note: If you are planning to use your new spa right away, Peak Boost must be added first. Follow directions
for adding Peak Boost from this page.
1. Fill floating dispenser with pucks and open to setting 7.
2. Add 7 tablespoons (100 grams) of Arctic Pure
®
Refresh per 1500 litres (396 gallons) of water.
3. Add 2 1/2 tablespoons (35 grams) of Arctic Pure
®
Peak Boost per 1000 litres (265 gallons) of
water, to establish a Bromide reserve.
4. Test the Bromine level. Once bromine reads within the ideal range (3-5 ppm) turn tablet
dispenser down to 2 or 3 (more or less according to bather load).
Note: The above example is for a spa without an ozone system. If your spa is equipped with an ozone
system please contact your dealer for proper Bromine levels.
Weekly
1. Twice a week test and adjust Total Alkalinity, pH and Chlorine or Bromine levels.
In extreme cases of source water with high minerals (such as some well water), add
1 tablespoon (14 grams) per 1000 litres (265 gallons) of Arctic Pure
®
Best Defence weekly.
Important: Arctic Pure
®
Refresh significantly reduces pH and TA. One hour after adding Arctic Pure
®
Refresh test and adjust TA and pH as needed.
The use of Clarifiers and Foam inhibitors is not recommended with Silver Sentinel
Disposable filters!
IMPORTANT: Chemical doses given in this manual are for reference ONLY. ALWAYS refer to
product label for instructions.
