2
Fig. 4
XM476
5. Install the left-side cover over the plastic stiffener
and secure using the strap and velcro. See Fig. 5.
Fig. 5
XM477
6. Repeat for opposite side.
Fig. 6
XM478
NOTE: Depending on the windshield that is
installed, the handlebar and/or guards may need to
be adjusted to clear the windshield when turning
the handlebar.
7. Once everything is adjust correctly, secure the
brake assembly to the handlebar. Tighten to 80 in.-
lb.
!WARNING
When installing the right-side hand guard, be
sure to route the cover strap on the inside of the
throttle cable. DO NOT install over the throttle
cable. See Fig. 6.
Printed in the U.S.A.
®™Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701
0616
