manualshive.com logo in svg

Arctic Cat 2011 ATV 90, Operator'S Manual, Page: 38 / 68

Share
Download
Arctic Cat 2011 ATV 90 Operator'S Manual Download Page 38

36

General Information 

ATV Identification Numbers

The Arctic Cat ATV has two identi-

fication numbers: Vehicle Identifi-

cation Number (VIN) and Engine

Serial Number (ESN).
The VIN is located on the horizon-

tal frame bar on the front fender

frame.
The ESN is located on the left-side

of the engine crankcase.

These numbers are required by the

dealer to complete warranty claims

properly. No warranty will be

allowed by Arctic Cat if the VIN or

ESN is removed or mutilated in any

way.
Always provide the ATV name,

VIN, and ESN when contacting an authorized Arctic Cat ATV dealer

for parts, service, accessories, or warranty. If a complete engine must

be replaced, ask the dealer to notify Arctic Cat for correct registration

information.

Ignition Switch Key

Two keys come with the ATV. Keep the

spare key in a safe place.

Control Locations and Functions

Ignition Switch

The ignition switch has two positions.

OFF

 position — All electrical circuits

are off. The engine will not start. The

key can be removed in this position.

ON

 position — The ignition circuit is

complete, the engine can run, and the

headlights and taillight are on. The key

cannot be removed in this position.

Hand Brakes

The hand brakes should be applied whenever a braking situation is

needed.
Apply the brakes by compressing the brake levers toward the handle-

bar.

Brake Lever Lock

To engage and release a brake lever

lock, use the following procedure.

1. Compress the left brake lever.
2. Depress and hold the brake

lever lock.

3. While holding the brake lever

lock, release the brake lever.

KM809A

KM037A

ATV-0055A

CAUTION

Leaving the ignition switch in the ON position for a long period of
time when the engine is not running may cause the battery to dis-
charge. Always leave the ignition switch in the OFF position when
engine is not running.

MD0010

KC333A

Summary of Contents for 2011 ATV 90





































































Reviews:

No comments