35
General Information
ATV Identification Numbers
The Arctic Cat ATV has two identifi-
cation numbers: Vehicle Identifica-
tion Number (VIN) and Engine Serial
Number (ESN).
The VIN is located on the horizontal
frame bar.
The ESN is located on the left-side of
the engine crankcase near the lower
front.
These numbers are required by the
dealer to complete warranty claims
properly. No warranty will be allowed
by Arctic Cat if the VIN or ESN is
removed or mutilated in any way.
Always provide the ATV name, VIN,
and ESN when contacting an autho-
rized Arctic Cat ATV dealer for parts,
service, accessories, or warranty. If a complete engine must be replaced,
ask the dealer to notify Arctic Cat for correct registration information.
Ignition Switch Key
Two keys come with the ATV. Keep the
spare key in a safe place.
Control Locations and
Functions
Ignition Switch
The ignition switch has three positions.
OFF
position — All electrical circuits are
off. The engine will not start. The key can
be removed in this position.
ON
position — The ignition circuit is
complete, the engine can run. The key cannot be removed in this posi-
tion.
LIGHTS
position — The ignition circuit is complete and the parking
lights and taillights are on. The headlight switch is active and the key
cannot be removed in this position.
Hand Brakes
The hand brakes should be applied whenever a braking situation is
needed.
Apply the brakes by compressing the brake levers toward the handlebar.
KM857A
KM849A
ATV-0055A
CAUTION
Leaving the ignition switch in the ON or LIGHTS position for a
long period of time when the engine is not running may cause the
battery to discharge. Always leave the ignition switch in the OFF
position when engine is not running.
KM864
Summary of Contents for 150 2015
Page 63: ...61 Maintenance Record DATE SERVICE PERFORMED NOTES ...
Page 64: ...62 Maintenance Record DATE SERVICE PERFORMED NOTES ...
Page 65: ...63 NOTES ...
Page 66: ...64 NOTES ...