Troubleshooting
Occasionally a problem may arise that is minor in nature, and a service call may not be neccessary. Use this trou-
bleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or
Danby’s Toll Free Number
1-800-263-2629
for assistance.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The air conditioner doesn't start.
• The power supply is incorrect.
• The power plug is incorrect.
• There is a malfunction with the power
plug or socket.
• The fuse is blown.
• Insert the power plug tightly.
• Replace the power plug or socket.
• Call the service depot.
The LCD displays the number of
time, but it doesn't work.
• Is the TIMER ON in operation?
• Cancel the "SET TIMER" operation
or wait for the unit to run in “AUTO”.
Although it was set to COOL
mode, there is no cool air.
• The room temperature is lower than the
set temperature.
• The evaporator is frosted up.
• This is the normal phenomenon.
• Unit is running in defrosting operation,
it will resume running in normal
operation after defrosting.
Although it was set to DRY
mode, there is no cool air.
• The evaporator is frosted up.
• Unit is running in defrosting operation,
it will resume running in normal
operation after defrosting.
The LCD displays
• Low voltage over current protection.
• Turn off the unit and unplug the unit from
the power, after 10 minutes turn on the
unit. If the display is still the same
please call the service depot.
The LCD displays
The water tank gets full.
• Drain the tank.
• If the malfunction still exists, please call
the service dept.
17
Summary of Contents for DPA80C1WA
Page 37: ......
