1
Installation, Operation & Maintenance Manual
REACH-IN REFRIGERATORS AND FREEZERS
5.. Maintain. the. door/hinge. assembly. at. about. 100°,.
and slide it up to the top hinge pin. Confirm proper
alignment,.and.then.fasten.the.bottom.hinge.
6.. The.door.must.swing.closed.by.itself.with.no.restric-
tion, confirm that the door swings freely.
7. Restore power to the unit and confirm that the in
-
terior.light.turns.on.and.off.as.the.door.opens.and.
closes.and.that.the.evaporator.fan.is.running.
8.. If.necessary,.adjust.the.height.of.the.door.using.the.
plastic.spacer/washers.on.the.bottom.hinge.pin.
CAUTION
If the freezer vibrates excessively when the
compressor is running, loosen (but do not remove)
the compressor bolts.
Remove the Bottom Shroud (applies only
to bottom mounted condenser units)
Loosen.and.remove.the.bottom.shroud.two.top.screws..
Slide.the.bottom.shroud.up.and.out.
Total Restaurant Supply - https://totalsupply1.com - Toll Free 1-800-944-9304 - Local 507-288-9454
2940 Hwy 14 W, Rochester, MN 55901