Arcteq AQ-S215, Instruction Manual

Page: 181 / 289

Events
The programmable control switch function (abbreviated "PCS" in event block names) generates events
from status changes. The user can select which event messages are stored in the main event buffer:
ON, OFF, or both. The function offers five (5) independent switches.
Table. 5.4.7 - 89. Event codes.
Event number Event channel Event block name Event code Description
384 6 PCS 0 Switch 1 ON
385 6 PCS 1 Switch 1 OFF
386 6 PCS 2 Switch 2 ON
387 6 PCS 3 Switch 2 OFF
388 6 PCS 4 Switch 3 ON
389 6 PCS 5 Switch 3 OFF
390 6 PCS 6 Switch 4 ON
391 6 PCS 7 Switch 4 OFF
392 6 PCS 8 Switch 5 ON
393 6 PCS 9 Switch 5 OFF
5.4.8 Analog input scaling curves
Sometimes when measuring with RTD inputs, milliampere inputs and digital inputs the measurement
might be inaccurate because the signal coming from the source is inaccurate. One common example
of this is tap changer location indication signal not changing linearly from step to step. If the output
difference between the steps are not equal to each other, measuring the incoming signal accurately is
not enough. "Analog input scaling curves" menu can be used to take these inaccuracies into account.
Analog input scaling curve settings can be found at Measurement
→
AI(mA, DI volt) scaling menu.
Currently following measurements can be scaled with analog input scaling curves:
• RTD inputs and mA inputs in "RTD & mA input" option cards
• mA inputs in "mA output & mA input" option cards
• Digital input voltages
Table. 5.4.8 - 90. Main settings (input channel).
Name Range Step Default Description
Analog input
scaling
0: Disabled
1: Activated
-
0:
Disabled Enables and disables the input.
Scaling curve 1...4
0: Disabled
1: Activated
-
0:
Disabled
Enables and disables the scaling curve and the input
measurement.
A AQ Q-S215 -S215
Instruction manual
Version: 2.04
180