9
Charging
The SP-01 can be placed on the charger (SPC-01).
1.
Insert the unit into the charger, allow unit to charge fully overnight (the staff page must be
charged at least 16 hours before use)
2.
Remove form charger, and pager will vibrate, beep and flash.
3.
Replace the pager in the charger at the end of each day.
Indicator
During charging
Light red: Charging is under way
Light green: Battery is full charging.
Massages
:
The pager can vibrate, beep, and flash the alarm lights
Alarming
The staff pager SP-01 will alarm a certain type and pattern depending on the alarm mode- A1,
A2, or A3 of the ATX-01. That is selected from the ATX-01 keypad.
Programming
If a new staff pager number needs to be assigned to a pager, staff pager can be reprogrammed form
the ATX-01 transmitter.
Program Staff pager’s ID number:
Be sure the staff pager is into programming mode -the pager’s indicator LED – Green and Red
LED will alternate blinking.
※1