Arcora International M5 PLUS, Operation Manual, Page: 9 / 12

Section 3
Replacing the foam and motor protection filter .
From time to time, the foam and motor protection filters
must be changed. In the event of visible contamination, you
can clean them by rinsing in lukewarm water with a little
detergent and after complete drying, replace the cover.
HEPA-Filter
♦ Remove three screws in the lid, take off the lid and
remove the foam filter.
♦ Insert a new or cleaned filter.
♦
Put the lid on and tighten the screws.
Unscrew the
the screws
Remove
the lid
Foam filter
Handling