4
2024 series Pneudraulic Installation Tool (HK1077)
Specifications
Stroke:
0.850 in (
2.16 cm
)
Weight:
5.5 lbs (
2.5 kg
)
MAX air PreSSUre:
90 psi (
6.2 bar
)
Max Flow rate:
8.5 scfm
(
241 l/min
)
Power Source:
90 psi (
6.2 bar
) maximum shop air
Max Operating Temp:
125° F (
51.7° C
)
Pull Capacity:
3993
lbs @ 90 psi (
17.76 kN @ 6.2 bar
)
3549
lbs @ 80 psi (
15.79 kN @ 5.5 bar
)
Hose Kits:
Use only genuine Huck Hose Kits rated @
10,000 psi (
689.5 bar
) working pressure.
Hydraulic Fluid:
Hydraulic fluid shall meet DEXRON
®
III, DEXRON VI, MERCON
®
, Allison C-4 or equivalent
Automatic Transmission Fluid (
ATF
) specifications. Fire-
resistant fluid may be used if it is an ester-based fluid
such as Quintolubric
®
HFD or equivalent. Water-based
fluid shall NOT be used as serious damage to equipment
will occur.
Models 2024 & 2024l
Models 2024V & 2024lV
Inches
(
cm
)
Inches
(
cm
)
Where the following trade names are used in this manual, please note:
DEXRON
is a registered trademark of General Motors Corporation.
GLYD Ring
is a registered trademark of Trelleborg Sealing Solutions Germany GmbH
Loctite
is a registered trademark of Henkel Corporation, U.S.A.
LUBRIPLATE
is a registered trademark of Fiske Brothers Refining Co.
MERCON
is a registered trademark of Ford Motor Corp.
MOLYKOTE
is a registered trademark of Dow Corning Corporation
Never-Seez
is a registered trademark of Bostik, Inc.
Quintolubric
is a registered trademark of Quaker Chemical Corp.
Slic-tite
is a registered trademark of LA-CO Industries, Inc.
Spirolox
is a registered trademark of Smalley Steel Ring Company
Teflon
is a registered trademark of Chemours Company FC.
Threadmate
is a registered trademark of Parker Intangibles LLC.
TRUARC
is a trademark of TRUARC Co. LLC.
Vibra-Tite
is a registered trademark of ND Industries, Inc. USA.
