6
Windows Software
The eSATA RAID+™ has a monitoring program that runs automati-
cally when you start your computer. The function of this program is to
monitor the status of the Channel 1 and Channel 2 drives and to alert
you if both drives are not identical. It eliminates the need to run the
eSATA RAID+™ application to check the status of the drives. The
monitoring program places a small icon in the system tray at the
bottom right–hand corner of your computer screen.
Right click on the eSATA RAID+™ system tray icon to bring up
the following choices:
Start the application
About the eSATA RAID+ Monitor (the monitor revision number)
Exit (stop monitoring)
Double click on the eSATA RAID+™ system tray icon to open
the eSATA RAID+™ Status window.
The color of the icon changes according to the eSATA RAID+™
Status. The colors may be interpreted as follows:
Blue
The eSATA RAID+™ application did not find the
eSATA RAID+.
Red
The eSATA RAID+ is
NOT IN MIRROR MODE
.
Yellow
The eSATA RAID+ is
IN MIRROR MODE
but the
drives are
NOT IDENTICAL
Green
The eSATA RAID+ is in Mirror Mode and the drives
are
IDENTICAL
Summary of Contents for EzRAID eSATA RAID+
Page 1: ...Quick Start Guide by Arco ...
Page 2: ...2 ...
