Installation
1. Flush pipework prior to installing to ensure it is free of debris.
2. Screw the shower mixer body (1) to the nogging. Ensure depth to
finished wall is within the specified limits of 74 to 111mm. Do not
remove plastic protective cover at this stage.
3. Attach water hot and cold inlets and outlet and test for leaks.
4. After wall has been finished, remove plastic protection cover. Apply
sealant to inside perimeter of dress plate (2) and push on firmly
against the wall.
5. Push on mixer handle (3) and lock into place using grub screw (4).
SYNERGII BATH-SHOWER MIXER WITH DIVERTER
74-111
55
Finished wall
50mm
recommended
30mm
recommended
2
1
3
6
4
Switched
output
Default
output
