ArchWork SMARTDRIVER1248, User Manual

Page: 17 / 24

5
SMARTDRIVER 1248
Fig.1
DC IN
GROUP 1
GROUP 2
GROUP 3
GROUP 4
NO FUNCTION
NO FUNCTION
+12 - 48V
- 0V
0 ~ 10V External Signal
IN
OUT
DALI
DALI IN
DA +
DA -
EXT +
EXT -
EXT +
EXT -
DA +
DA -
DALI OUT
DMX
DMX IN
D -
GND
D +
D -
GND
D +
DMX OUT
DC IN
GROUP 1
GROUP 2
GROUP 3
GROUP 4 NO FUNCTION
NO FUNCTION
+12 - 48V
- 0V
0 ~ 10V External Signal
IN
OUT
DALI
DALI IN
DA +
DA -
EXT +
EXT -
EXT +
EXT -
DA +
DA -
DALI OUT
DMX
DMX IN
D -
GND
D +
D -
GND
D +
DMX OUT
+12 - 48V
- 0V
DMX IN
D -
GND
D +
- 2 - INSTALLATION
2.1 MOUNTING
The SMARTDRIVER1248 controller can be installed to the wall.
• Remove the front cover and secure the controller to the wall using the 4 screws.
• Replace the cover on the front of the controller.
2.2 CONNECTIONS
• DMX: connect the DMX cable to lighting fixtures.
• POWER: connect the power DC12V-48V. Make sure to not invert the positive and the ground.
• DALI control (Digital Adressable Lightning Interface): make sure to not invert the polarity
Follow the wiring diagram as shown in figure.
CONNECTOR BLOCK