13
ARCPLOT27TRI
3.8 BASIC INSTRUCTIONS FOR DMX OPERATION ARCFULL
DIMMER
•
CH1 controls the intensity of the currently projected color.
•
When the slider is at the highest position (255) the intensity of the output is the maximum.
RED, GREEN E BLUE, COLOR SELECTION
•
CH2, CH3 and CH4, control the intensity ratio of each of the red, green, blue.
•
When the slider is at the highest position (255) the intensity of the color is the maximum.
•
CH2, CH3 and CH4 can be combined together to create over 16 million colors.
COLOR MACRO E BILANCIAMENTO BIANCO
•
CH5 selects the required COLOR MACRO and whites in different color temp.
•
CH5 has priority over CH2, CH3 and CH4.
•
CH1 is used to control the intensity of the COLOR MACRO.
STROBE
•
CH6 controls the strobe of CH1 to CH5.
DIMMER SPEED
•
CH7 is used to select the kind of dimmers curve required.
3.9 SPECIAL FUNCTIONS
•
Press the button menu and select through the directional buttons the
[SETTINGS]
mode; and press
the button ENTER to confirm.
It is possible to view to following functions:
COLOR
•
[COLOR]
is for activate/deactivate the color calibration functions.
- When
[RGB]
is selected, on RGB =255, 255, 255 the color is displayed as calibrated in CAL2 (RGB).
When
[COLOR]
is set
[OFF]
, son RGB =255, 255, 255 the RGB values are not adjusted and the output
is most powerful.
- When
[UC]
s selected, the RGB output adjusted to a standard preset universal color which bal-
ances fixtures from different generations..
RESET
•
In order to reset custom modesto default values select
[RESET]
.
3.10 DIMMER
•
Enter
[DIM]
to select dimmer mode and dimmer speed. When dimmer is set to
[OFF]
, the RGB and MAS-
TER DIMMER are linear. The Dim1/2/3/4 are speed modes of the non linear dimmer,
[DIM 1]
is the faster,
while
[DIM 4]
is the slowest.
Note. The factory default setting is
[DIM 4]
.
