ARCPALM
10
3.7 MASTER/SLAVE MODE
This mode allows for multiple units slave fixtures to follow a single master fixture.
MASTER SETTINGS
•
Connect the fixtures with DMX cables.
•
Set the master fixture to one of the standalone operating modes: automatic, user mode or C-- modes.
SLAVE SETTINGS
•
Set the slave fixture(s) to DMX mode (10CH, 5-CH or 4-CH).
3.8 LINKING
Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
1. Connect the DMX OUT of the master unit via 3-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.9 DMX OPERATION
•
Press MENU button until the following appears on the LED screen:
[PERS]
. Press ENTER button.
•
Using UP/DOWN button, select the desired personality
[10CH]
,
[5-CH]
or
[4-CH]
. Press ENTER button.
•
Press MENU button until
[AddR]
appears on the LED screen. Press ENTER button.
•
Using UP/DOWN button, select the desired DMX starting address
[d001 - d512]
. Press ENTER button.
3.10 DMX ADDRESSING
To able to operate the ARCPALM with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the ARCPALM. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
4
33
33-36
37
41
45
5
33
33-37
38
43
48
10
33
33-42
43
53
63
3.11 DIMMER
Enter to
[DIM]
to select specific dimming curve. When dimmer is set to
[OFF]
, the dimmer is linear.
DIM1/2/3
are speed modes of the not linear dimmer;
[DIM1]
is the faster, while
[DIM3]
is the slowest.
Summary of Contents for ARCPALM
Page 1: ...Manuale Utente User Manual ARCPALM LED PROJECTOR EN IT ...
Page 17: ......
Page 35: ......
