MANUAL
V1.0
TV+
THE TV PRoGRAM GUIdE > P. 66
“Key: -/--”:
Set to “
On
” if normally, you need to press a special key on your tuner’s remote control before
entering a channel with several digit numbers (that is to say a channel greater than 9). This key is often
represented with this symbol: “
-/--
”.
“Switches on with”:
see below.
“Time until video”:
see below.
If the ARCHOS did not manage to switch your tuner to the selected channel,
you can try using a different ON/OFF code (see:
1
st
Test: turning your tuner off
)
and do the 2
nd
test again.
After you selected “
Yes
” at the end of the 2
nd
step, the following screen appears.
You will have to set these two parameters:
“
Switches on with
”: this depends on what key you normally press, on your
tuner’s remote control, to turn it on. If you normally press the “
Power
” key,
select “
Power
”. If you can press any channel key, then select “
Any channel
”. If
you can press any key, select “
Any key
”.
“
Time until video
”: select the amount of time it normally takes between the
moment you turn on your tuner, and the moment the image appears on your
TV (“
0...10 seconds
”, “
10...30 seconds
”, “
>30 seconds
”).
When you have finished, select “
Done
”, and a confirmation message will appear.
Select “
OK
”.
9.5 sCheduling yOur reCOrding
In the Home screen, select the
“
Recorder
” icon to display the
ARCHOS TV Program Guide.
This screen’s menu items will al-
low you to choose a different day,
update the Program Guide data, or
change various settings (program
guide update and channel list con-
figuration).
1.
2.
-
-
-
3.
-
-
4.