Archon RTB16 Installation, Operation, &  Maintenance Instruction Download Page 2

 

PRODUCT WARRANTY 

 

ARCHON Industries Inc., warrants its products, as 
designed and manufactured by ARCHON, to be free of 
defects in material and workmanship for a period of one 
year after the date of installation or eighteen months 
after the date of manufacture, whichever is earliest.  
ARCHON will, at its option, replace or repair any 
products that fail during the warranty period due to 
defective material or workmanship. 
 
Prior to submitting any claim for warranty service, the 
owner must submit proof of purchase to ARCHON and 
obtain written authorization to return the product.  
Thereafter, the product shall be returned to ARCHON in 
Suffern, New York, with freight prepaid. 
 
This warranty shall not apply if the product has been 
disassembled, tampered with, repaired or altered outside 
of the ARCHON factory, or if it has been subjected to 
misuse, neglect or abuse. 
 
ARCHON's responsibility hereunder is limited to 
repairing or replacing the product at its expense.  
ARCHON shall not be liable for loss, damage, or 
expenses directly or indirectly related to the installation 
or use of its products, or from any other cause or for 
consequential damages.  It is expressly understood that 
ARCHON is not responsible for damage or injury caused 
to other products, building, property or persons by 
reason of the installation or use of its products. 
 
THIS IS ARCHON'S SOLE WARRANTY AND IN LIEU 
OF ALL OTHER WARRANTIES, EXPRESSED OR 
IMPLIED WHICH ARE HEREBY EXCLUDED, 
INCLUDING ALL WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. 
 
This document and the warranty contained herein may 
not be modified and no other warranty, expressed or 
implied, shall be made by or on behalf of ARCHON 
unless modified or made in writing and signed by the 
President or a Vice President of ARCHON. 
 

WARNINGS AND SAFETY 
PRECAUTIONS 

IMPORTANT: READ ALL INSTRUCTIONS BEFORE USING 
SPRAY GUN 
 

 

For water use only. 

 

Before spraying, gun must be pointed in direction of 
arrow shown on side of gun. 

 

If spray gun assembly is equipped with trigger lock 
ring, the ring must be released before spraying 
operation is finished. 

 

Proper clothing and eye protection should always be 
worn by operator and people in spray areas. 
 

 

DO NOT

 use with steam service. 

 

DO NOT

 point spray gun at any person or any part 

of body.  High temperature liquids under spraying 
pressures can cause serious burns or injury. 

 

DO NOT 

exceed 200

˚

F (93

˚

C) temperature. 

 

DO NOT

 exceed 150 psi. 

 

DO NOT

 drop gun on trigger as this may actuate hot 

spray onto personnel. 

 

INTRODUCTION

 

 

The model RTB16 spray gun is a heavy-duty, impact 
resistant spray gun with a stainless steel or bronze body 
and a replaceable synthetic body cover.  The Model 
RTB16 spray gun provides a variable liquid spray from a 
50 degree hollow cone to a stream spray pattern by 
trigger control.  The light trigger pull provides sensitive 
spray pattern control.  The heat resistant rubber body 
cover remains comfortable at high liquid temperatures.  
The Model RTB16 spray gun connection is 1/2” NPT, 
and will accommodate inlet swivel connectors with 3/4” 
garden hose thread (F), 5/8” or 3/4" hose shank inlet 
connections.  These connectors also have lock rings for 
locking the Spray Gun trigger in a spraying position. 
 

SYSTEM DESCRIPTION

 

 

Features of the Model RTB16 Spray Guns:

 

 

Maximum pressure and temperature: 150 psi at 
200

˚

F (10.3 bar at 93

˚

C) 

 

Single piece stainless steel or bronze body 

 

Stainless Steel valve stem 

 

Viton valve seat and Buna O-ring seals 

 

Comfortable hand grip  

 

Easy operation - designed to reduce fatigue 

 

Replaceable rubber body cover provides 
temperature insulation and protects spray gun from 
extensive wear 

 

Easy repair - all components are user serviceable 

 

INSTALLATION 

 

1.  Ensure water supply valve is off.  Attach RTB16 

spray gun to a hose that has a pressure and 
temperature rating meeting that of your anticipated 
maximum supply pressure and temperature. 

 
2.  Examine all connections, making sure they are of 

proper type and are secure and leak-proof. 

 

3.  Holding the RTB16 spray gun in a downward vertical 

position with arrows pointed away from the body, 
turn on the water supply valve. 

 
4.  After checking that all safety precautions have been 

taken, begin spraying by slowly squeezing the 
trigger. 

 

Reviews: