ARCHON Industries, Inc.
RTB16 Spray Gun
Models:
RTB16-BB
RTB16-SB
Installation / Operation / Maintenance Instruction
Instruction No.:
1037
Issued:
01/06/2017
Approved:
Frank Bongiorni, Engineering Mgr.
Page 1: ...ARCHON Industries Inc RTB16 Spray Gun Models RTB16 BB RTB16 SB Installation Operation Maintenance Instruction Instruction No 1037 Issued 01 06 2017 Approved Frank Bongiorni Engineering Mgr ...
Page 2: ...ped with trigger lock ring the ring must be released before spraying operation is finished Proper clothing and eye protection should always be worn by operator and people in spray areas DO NOT use with steam service DO NOT point spray gun at any person or any part of body High temperature liquids under spraying pressures can cause serious burns or injury DO NOT exceed 200 F 93 C temperature DO NOT...
Page 3: ... valve lubricant such as Dow Corning MOLYKOTE 111 to all O ring seals Sliding metal surface should be lubricated with Logix Thread Smart Anti Seize compound When reassembling the RTB16 spray gun apply LOCTITE 243 to FRONT BODY BUSHING 2 and HEX HD SCREW 8 1 Check that BODY 1 is clean and ready for assembly 2 Insert STEM ASSEMBLY 3 into BODY 1 until it is fully seated Make sure all seals are undama...
Page 4: ...ASSEMBLY RTB16 SPRAY GUN ...
