6
• Be careful not to pull by the cable when pulling the plug out.
• DO NOT PLUG IN your appliance before removing all packaging materials and
protective transport elements.
• To prevent horizontal handling and in order to ensure complete distribution of the
condenser oil, keep the appliance in upright position for 4 hours before operating.
• Make sure that the plug is easily accessible. Do not use multi sockets or extension cables.
• Do not allow blocking of ventilation openings in the product casing or in the built-in
structure.
• Before plugging in the product, make sure that the voltage and frequency values printed
on the product rating plate in your appliance conform to the values of the supply power in
your house. This rating plate is on the inner left wall of the refrigerator.
• We recommend plugging in this product to a socket which is properly switched and fused.
The plug of the appliance should be located as to be easily accessible.
• Warning! The product must always be plugged into a grounded socket.
• If the molded plug at the end of the power cable of the product does not match with the
socket, the plug must be cut and replaced by a suitable one.
• Dispose of the plug you have cut since a plug with naked cable can cause electric shock
when plugged in another socket in the house.
Important! Attaching a different plug
As the colors of the wires in the power cable of the appliance might not match with the color
codes defining the terminals in your plug, proceed as follows:
1.
Attach the green-yellow or green colored wire (ground) to the terminal on the plug
which is marked with ‘E’ sign,
symbol or which has green and yellow or only green color.
2. Attach the blue (Neutral) wire to the terminal on the plug which is marked with ‘N’ or is in
black color.
3. Attach the brown (Phase) wire to the terminal on the plug which is marked with ‘L’ or is in
red color. In alternative plugs, a 13-Ampere fuse must be attached to the plug or the adaptor in
the mains plug box.
