18
Dishwasher / User’s Manual
/
57 EN
PreparatIon
C
Liquid/gel detergents
that lost their fluidity and
became firm must not be
used in automatic liquid/gel
detergent dosing system.
Liquid/gel detergents must be used
in a short time once they have been
unpacked. Unpacked liquid/gel
detergents may lose their fluidity in
time.
C
When the detergent
warning lamp gives a
warning, it will go away
in a short while after you
add liquid/gel detergent. If
the warning light is still on
after a washing cycle, you
can remove the detergent
cartridge, shake it a few
times and reinstall it.
This may occur because of
the blockage of the warning
gauge due to the detergent
residues remained in the
cartridges after a long term
use.
To avoid this, it is
recommended to clean
the detergent cartridge
thoroughly once in two or
three months.
You can soak it in lukewarm
water, and you can can
wash with tap water.
This way, dosing problems
caused by accumulated
detergent residues, as well
as blockage of the warning
mechanism is prevented
and it is ensured that the
system works properly.
C
If a different brand or type of
liquid/gel detergent will be
used, make sure previous
detergent is depleted
completely and then remove
and clean the liquid/gel
detergent tank under tap
water.
C
Fill the rinse air box only
with rinse aid, and the
detergent box only with
liquid/gel detergent.
If you fill it inappropriately,
immediately remove the
boxes, empty them and
clean under running water.
Installing/Removing the Liquid/Gel
Detergent and Rinse Aid Box
Top remove the rinse aid and detergent
boxes, push and lift the system cover
on both sides as shown with arrows 1
and 2 and open.
1
2
1
Lift and remove the rinse aid box (A).
A
B
1
2
