23 / EN
Dryer / User Manual
Operating the product
Adding and removing clothes during stand-by
If you want to add or remove clothes to/from the
machine after the drying program starts:
1. Press the Start/Stand-by button to put
the machine in Stand by state. The drying
operation stops.
2. Open the loading door while in Stand-by
state, and close the door after you remove or
add laundry.
3. Press the Start/Stand-by button to start the
program.
C
Adding laundry after the drying operation
starts may cause the dried laundry inside
the machine to mix with wet laundry and
leave the laundry damp at the end of
operation.
C
Adding or removing laundry during drying
may be repeated as many times as you
wish. But this operation continuously
interrupts the drying operation, and thus
increases program duration and energy
consumption. So, it is recommended to add
laundry before the program starts.
C
If a new program is selected by turning the
program selection knob while the machine
is in stand-by; the running program
terminates and new program information is
displayed on the screen.
WARNING:
Do not touch the inner surface
of the drum while adding or removing
clothes during a continuing program. The
drum surface is hot.
5.15 Cancelling the program
If you want to cancel the program and terminate the
drying operation for any reason after the machine starts
running, keep the
On/Off/Cancel
button pressed for 3
seconds.
A
WARNING:
The inside of the machine
shall be extremely hot when you cancel
the program during machine operation, so
run the ventilation program to allow it to
cool down.
5.16 End of program
When the program ends, the Fibre Filter Cleaning and
Water Tank warning symbols on the program observation
indicator turn on. Loading door may be opened and
machine becomes ready for another run.
To turn off the machine, press the
On/Off/Cancel
button.
C
2 hour-Wrinkle Prevention program is
activated if laundry isn't taken out of
machine after completion of the program.
C
Clean the fibre filter after each drying.
(See "Fibre filter and Loading door inner
surface")
C
Empty the water tank after each drying.
(See "Emptying the water tank")
5.17 Odour feature
Your drying machine is equipped with odour feature.
Read the ProScent operation manual for the usage of
this feature.
There are 3 different scent options that you may use on
your machine. Fresh, Flower / Rose, Ocean.
Your machine contains one type of scent capsule, you
may obtain the other scent capsules from the authorized
services. Use the scent capsules procured from the
authorized services only.
