background image

Batteries

Intended Use

9

The flammable R32 type refrigerant is 

used in the device. There is a risk of fire 

if refrigerant leaks and is exposed to an 

external source of ignition. 

Keep the power cable away from heat 

sources .

Do not place any objects on the power 

cable 

If the product shall not be used for a 

long time, disconnect it from power 

from the fuse.

Contact the Authorized Service if the 

product gets wet in any way.

Avoid contact of the electrical 

components with water. If case of 

contact of the electrical components of 

the product with water, switch off the 

product and call the Authorized Service.

If case of a strange sound, smoke or 

smell coming from the product, turn off 

the product from the fuse box and call 

the Authorized Service.

During installation, maintenance, 

cleaning and repair work, make sure 

that the power is cut off from the fuse.

Installation and repair should always be 

performed by Authorized Service. 

Manufacturer shall not be held 

responsible for damages caused by 

operations performed by unauthorized 

persons.

Do not expose people, animals or 

plants to hot or cold air blown by the 

A/C.

Make sure that only the parts specified 

in the service parts list are used. Do not 

modify the device. Failure to do so may 

result in death, serious injuries or 

damage to the product.

If the A/C is left under water in cases 

like flood, contact the authorized 

service. Failure to do so may cause 

explosions or fire.

Do not place any items on the A/C. This 

may cause failure of the product.

For interior cleaning of the product, 

contact an authorized service or the 

dealer from whom you have purchased 

the product. Detergents shall not be 

used as they cause corrosion and 

damage to the surface.

There shall be no obstructions in front 

of all essential ventilation openings.

Do not expose batteries to direct 

sunlight, fire, etc. factors 

or excessive heat.

Do not use old and new batteries 

together.

Replace the depleted batteries only with 

batteries of the same model, value and 

specification. Do not use rechargeable 

batteries.

Dispose the depleted batteries in 

accordance with local laws and 

regulations. In this way, you contribute 

to the prevention of potential damages 

to the environment and human health.

Do not use the remote control if the 

batteries have leaked. If leaked liquid 

gets on your skin or clothing, wash with 

plenty of clean water.

Do not swallow any liquid leaking from 

the batteries. If swallowed, contact the 

nearest health institution.

 

This product is intended for interior 

operation.

The product's service life is 10 years. 

This is the period for which the spare 

parts required for the operation of this 

product as defined is provided by the 

manufacturer.

This product is not intended to be used 

by people with physical, sensory and 

mental disabilities (including children) or 

those who have not adequate 

experience and knowledge regarding its 

use, unless they are under the 

supervision of a person responsible for 

their safety or who shall provide the 

instructions required for the operation of 

the product.

Do not use the product for purposes 

other than cooling your environment 

(e.g. protection of delicate devices, 

food, pets, plants and art works). This 

product is not special cooling system, it 

is a consumer-type A/C. Such 

operations may damage these items.

Summary of Contents for 09565


































Reviews: