Service Support Spirit
Unique Solution
WWW.ARCBRO.COM
23
Pneumatic THC Lifter to replace Plasma THC Lifter
【
PLATEN
】
Assemble Step:
1-- Remove the anti-collision input cable.
2-- Remove the lifter motor control cable.
3-- Remove the cover of the lifter, and then
remove the lifter.
4-- Keep the red IHS wire’s tip away from any
conductive stuff.
Assemble Step:
5-- Install the pneumatic holder by screws.
6-- Install the plasma torch and adjust the height of
the torch
,
height range 0.5-1mm
