Service Support Spirit
Unique Solution
WWW.ARCBRO.COM
17
5. Clamp the V-wheels at the front and back of the control unit to the optical axis of the
longitudinal rail, and gently push the control unit into the longitudinal rail by hand.
Note: when installing of the control unit need to pay attention to the assembly of the gear of
the longitudinal motor and the rack of the longitudinal rail. When the control unit is unable to
enter, rotate the gear of the longitudinal motor by an angle, and then gently push the control unit
until the longitudinal rail can be pushed forward.
6.Remove the bolts of the fireproof board and fix the fireproof board
Note: When installing the fireproof board, use bolts to fix the fireproof board, and prevent
your hands from being cut by the fireproof board.
Use an hexagon wrench to remove the
mounting bolts of the fire board and install
the fireproof board.
Side view of installation of the fireproof
board.
Align the wheels of the Controller unit and the guiding rail, Push the Controller unit to slide
in along the Guide Rail.
